The new Xaar 502 printhead reaches higher levels of performance in inkjet graphics. Whether printing large exterior banners or indoor point-of-sale material, this premium printhead delivers exceptional print quality, excellent reliability and high production up-time. Value added effects such as printing on transparent or coloured substrates or adding varnishes are made easy with the Xaar 502.
The new and unique PrecisionPlus™ architecture of the Xaar 502 builds on Xaar’s incredibly successful Hybrid Side Shooter™ architecture. This new architecture optimises the actuator performance giving more uniform drop formation across the print swathe and therefore exceptional print quality for stunning graphics.
PrecisionPlus architecture flips the PZT’s (Piezo actuators) supporting substrate on its side so the PZT is on the edge of a rigid block of substrate. This architecture means that there is more stiffness in the z axis (better support for the PZT).
The Xaar 502 GS15 O is suitable for oil-based printers with a vacuum (gravity) fed mode ink system. The last chance ink filter fitted on the inlet port avoids particules, debris or air bubbles get into the printhead.
The Xaar 502 GS15 O has a C&M (coding & marking) nozzle guard which is positioned away from actuator sitting flush to the sides. So in Skycraper mode ink can drain away.
The Xaar 502 GS15 O can be used as a replacement to Xaar 500/80 printheads (discontinued). An ICM (Interface connection module) enables X500/80 based printers to communicate with Xaar 502 printheads. The ICM requires a waveform loaded onto it by Xaar. In many cases, the ink system of the Xaar 500/80 based printer will also need some modification as Xaar 500 printheads has 4 ink feeds whereas Xaar 502 printheads have 1 ink feed). Our engineer team can help implementing these changes to migrate existing printers from 500/80 to 502 printheads.
- Active nozzles : 500
- Print swathe width : 70,5mm
- Number of rows : 1
- Nozzle density : 180 Npi
- Nozzle Guard : C&M
- Ink types : Oil
- Drop volume : 15 – 75pl
- Number of grey level* : 6
- Filter : Yes (Last chance filter)
- Heater : No
- TF Technology® mode : None
- Typical firing frequency @ Max DPD*: 7,2khz
- Dimensions (WxDxH) : 104 x 17 x 113mm
- Jetting orientation : Downshooter, horizontal and Skycraper (see picture)
- Inlet / Outlet connections : Hose barb 4mm